Calc Yu Yu Hakusho Feats - Chapter Black Power and Speed (Okunen Scaled)

Demon Portal and Crater Scaled Blogs.

I'd first like to point out the Makai tournament is basically taking place in Yomi's country, therefore, I feel I should have no issues using the size of mountains I scale in said country to get a size for these things.

How though?

This thing is large enough where Mukuro and Hiei don't even appear visible standing on it, despite standing outside on it. Not to mention on the side where they should be visible (it's clearly the right of the fortress, given they should be facing the front of the fortress).

So, speak up now, but I'm going to use 1 pixel for Hiei's Height here when measuring the cloud of dust's width (well... it is much larger than the fortress, and the only thing we can scale shit off of.

Hiei is 1.61 meters tall as found here


Cloud of Dust Width = 794 pixels
Hiei (as I said, not even able to be seen the thing is so massive) = 1 pixel

Cloud of Dust Width/Hiei = 794

Hiei = 1.61 meters
Cloud of Dust Width = 1,278.34 meters

Now, I have 2 scans to work with to scale the size of rock formations in Yomi's country.


Yeah.

Anyway, the size of the mountain in his country are actually pretty consistent from all appearances.


Okunen Tree Top = 124 pixels
Rock Formation = 32 pixels

Okunen Tree Top/Rock Formation = 3.875

Okunen Tree Top (Size 1) = 45,201.305 meters
Okunen Tree Top (Size 2) = 51,353.265 meters

Sure, all this shit dwarfs earth sized structures, but this is Makai.

Anyway, why bother with this?

Togashi was nice enough to draw Mature Okunen back in chapter 147

I can say they're mature Okunen due to how much they dwarf everything in the area.

The ratio fits what we see back in Yomi's country.

I won't blame anyone who starts laughing at the results

Anyway?

As I point out up above, we see mature Okunen in the area, therefore I can scale the rock formations like Chopping Block Plateau and the Plateau Yusuke busted off of the size.


Okunen Tree Top = 388 pixels
Immature Okunen Top = 53 pixels

Immature Okunen Top/Okunen Tree Top = 0.137

Okunen Tree Top (Size 1) = 45,201.305 meters
Okunen Tree Top (Size 2) = 51,353.265 meters

Immature Okunen Top (Size 1) = 6,192.579 meters
Immature Okunen Top (Size 2) = 7,035.397 meters

That out of the way?

The first feat

Shinobu Sensui's Shockwave

Here is the Feat


Immature Okunen Top = 284 pixels
Chopping Block Plateau Height (Blue Line) = 507 pixels
Chopping Block Plateau Height (Green Line) = 282 pixels
Chopping Block Plateau Length (Red Line) = 1098 pixels

Chopping Block Plateau Length (Red Line)/Chopping Block Plateau Height (Greeen Line) = 3.894
Chopping Block Plateau Height (Blue Line)/Immature Okunen Top = 1.785

Chopping Block Plateau Height (Size 1) = 11,053.754 meters
Chopping Block Plateau Height (Size 2) = 12,558.184 meters

Chopping Block Plateau Length (Size 1) = 43,043.318 meters
Chopping Block Plateau Length (Size 2) = 48,901.568 meters

I feel measuring the second dimension that's badly scrunched up is not necessary given the only scan we can see the full on top of Chopping Block Plateau we see that both length and width are roughly even.

Volume is a triangular prism = ((LW)/2)*H

Chopping Block Plateau Volume (Size 1) = 10,239,795,484,081.7 m^3
Chopping Block Plateau Volume (Size 2) = 15,015,590,498,027.76 m^3

200 j/cc (as you can infer here, the mass was by all appearances half pulverized as indicated by the large quantity of dust and the fact the remaining non-pulverized mass sits well beneath the remaining original height of the plateau)

Shinobu Sensui's Shockwave Yield (Low End) = 2,047,959,097,000,000,000,000 joules or 489.474 gigatons
Shinobu Sensui's Shockwave Yield (High End) = 3,003,118,100,000,000,000,000 joules or 717.762 gigatons

One down...

Next feat

Chapter Black Yusuke Urameshi's Reigan

Here is the Feat


Note the Reigan. No, I'm not using that to scale. Especially since Togashi never draws his energy blasts to scale in YYH. Unless we're really supposed to believe the Reigan is 100 meters in diameter in the EoDT version.

No, I'm going to use the fact the Reigan is obviously even with Chopping Block Plateau in height to tackle this. My scaling will assume Chopping Block Plateau's height is from the bottom of the plateau to the middle of the Reigan (given we have no clue how large or far away it is from the formation, this is a pretty safe estimate regardless)

Top Panel

Plateau Height = 180 pixels
Plateau Width = 351 pixels
Chopping Block Plateau Height = 96 pixels

Plateau Height/Chopping Block Plateau Height = 1.875
Plateau Width/Chopping Block Plateau Height = 3.656

Chopping Block Plateau Height (Low End) = 11,053.754 meters
Chopping Block Plateau Height (High End) = 12,558.184 meters

Plateau Height (Low End) = 20,725.789 meters
Plateau Height (High End) = 23,546.595 meters

Plateau Width (Low End) = 40,412.525 meters
Plateau Width (High End) = 45,912.721 meters

Bottom Panel

Plateau Width = 351 pixels
Bottom Crater Width = 166 pixels
Top Crater Width = 281 pixels
Remaining Plateau Height (Will be used to get crater depth) = 28 pixels
Distance of Destroyed Mass = 52 pixels

Remaining Plateau Height/Plateau Width = 0.0798
Bottom Crater Width/Plateau Width = 0.473
Top Crater Width/Plateau Width = 0.801
Distance of Destroyed Mass/Plateau Width = 0.148

Plateau Width (Low End) = 40,412.525 meters
Plateau Width (High End) = 45,912.721 meters

Remaining Plateau Height (Low End) = 3,224.919 meters
Remaining Plateau Height (High End) = 3,663.835 meters

Bottom Crater Width (Low End) = 19,115.124 meters
Bottom Crater Width (High End) = 21,716.717 meters

Top Crater Width (Low End) = 32,370.433 meters
Top Crater Width (High End) = 36,776.09 meters

Distance of Destroyed Mass (Low End) = 5,981.054 meters
Distance of Destroyed Mass (High End) = 6,795.083 meters

Subtract the Total height by the remaining height to get the crater depth.

Crater Depth (Low End) = 17,500.857 meters
Crater Depth (High End) = 19,882.76 meters

I'll also assume the Plateau is at a bear minimum as thick as it is Wide (in assuming rock formations in the area keep consistent with Chopping Block Plateau's Dimensions)

The Reigan is shown to have gone through to the other side of the Plateau here. I can say that, given what we see of the top left corner of the plateau. We can see all the way Behind the Plateau.

Plateau Depth (Low End) = 40,412.525 meters
Plateau Depth (High End) = 45,912.721 meters

Volume = (0.5h(B1+B2))*H

B1 = Bottom Crater Width
B2 = Top Crater Width
h = Crater Depth
H = Plateau Depth

Total Volume (Low End) = 18,206,678,458,154.97 m^3
Total Volume (High End) = 26,698,211,525,501.65 m^3

Rock Density = 2,700 kg/m^3

Total Destruction Mass (Low End) = 49,158,031,837,018,420 kilograms
Total Destruction Mass (High End) = 72,085,171,118,854,460 kilograms

Now to find a speed for the Reigan and its explosion.


As you can see, in the first image the highest any of Sensui's Seikoki Armor was thrown into the sky was up to the location I measured with the green line

In the second image, in the bottom panel, we can see that the last remnants of the armor have started to finally fall back the height they were sent into the air by the time the Reigan impacted the Plateau

So, feat time

Apex of Seikoki Armor = 1383 pixels
Sensui = 673 pixels

Apex of Seikoki Armor/Sensui = 0.487

Sensui = 2 meters
Apex of Seikoki Armor = 0.974 meters

Apex of Seikoki Armor = Free Fall Distance of Seikoki Armor

Time Frame = sqrt(2d/g)

d = Free Fall Distance of Seikoki Armor
g = 9.8 m/s^2

Total Time Frame = 0.446 seconds

This time frame is for both the total Reigan travel and the explosion.

The actual ratio between both the explosion and the Reigan travel is difficult to determine, but attributing half to each low balls the speed of the travel, so that ultimately functions as the most conservative split.

Thus?

Travel/Explosion Time Frame = 0.223 seconds

As the Plateau is behind the effective horizon?

Height of Eye (Low End) = 11,053.754 meters
Height of Eye (High End) = 12,558.184 meters


Distance to Plateau (Low End) = 375,700 meters
Distance to Plateau (High End) = 400,400 meters

Chapter Black Yusuke Urameshi's Reigan Speed (Low End) = 1,684,753 m/s or mach 4,950.933
Chapter Black Yusuke Urameshi's Reigan Speed (High End) = 1,795,516 m/s or mach 5,276.429

Speed of Destroyed Mass (Low End) = 26,820.87 m/s
Speed of Destroyed Mass (High End) = 30,471.224 m/s

KE = 0.5mv^2

m = Total Destruction Mass
v = Speed of Destroyed Mass

Chapter Black Yusuke Urameshi's Reigan Yield (Low End) = 17,681,137,972,604,990,000,000 joules or 4.226 petatons
Chapter Black Yusuke Urameshi's Reigan Yield (High End) = 33,465,378,214,049,290,000,000,000 joules or 7.998 petatons

Next?

Chapter Black Yusuke Urameshi vs Shinobu Sensui's Clash on Makai Mountain

The Feat


Panel Width = 1699 pixels
Mountain Height = 121 pixels
Mountain Base = 35 pixels

Mountain Base/Mountain Height = 0.289

Height of Eye (Low End) = 11,053.754 meters
Height of Eye (High End) = 12,558.184 meters

http://www.ringbell.co.uk/info/hdist.htm

Distance to Mountain (Low End) = 375,700 meters
Distance to Mountain (High End) = 400,400 meters

2*atan(Object_Size/(Panel_Width/tan(FoV/2))) = object degree size

2*atan(121/(1699/tan(70/2)))

Mountain Height = 5.71 degrees

Calculator

Mountain Height (Low End) = 37,473 meters
Mountain Height (High End) = 39,936 meters

Yes, rather absurd height wise, but this is a world with 50 km tall trees that hold entire ecosystems. Scale's going to end up massive.

Mountain Base (Low End) = 10,829.697 meters
Mountain Base (High End) = 11,541.504 meters


Mountain Base = 525 pixels
Mountain Remainder = 237 pixels

Mountain Remainder/Mountain Base = 0.451

Mountain Remainder (Low End) = 4,884.193 meters
Mountain Remainder (High End) = 5,205.218 meters

Mountain Height Destroyed (Low End) = 32,588.807 meters
Mountain Height Destroyed (High End) = 34,730.782 meters

Cone Volume = (PIr^2*H)/3

Mountain Volume (Low End) = 1,000,621,201,000 m^3
Mountain Volume (High End) = 1,211,178,078,000 m^3

200 j/cc

Yusuke Urameshi vs Shinobu Sensui's Clash on Makai Mountain Yield (Low End) = 200,124,240,030,000,000,000 joules or 47.831 gigatons
Yusuke Urameshi vs Shinobu Sensui's Clash on Makai Mountain Yield (High End) = 242,235,615,500,000,000,000 joules or 57.896 gigatons

Lastly?

Possessed Yusuke Urameshi's Final Reigan

Here is the Feat in all its entirety


Panel Width = 1840 pixels
Trench Width = 371 pixels
Trench Depth = 79 pixels

2*atan(Object_Size/(Panel_Width/tan(FoV/2))) = object degree size

2*atan(371/(1840/tan(70/2)))

Trench Width = 16.072 Degrees

For height of eye, I'll be using the height of Chopping Block Plateau as a low end.

Height of Eye (Low End) = 11,053.754 meters
Height of Eye (High End) = 12,558.184 meters


Distance to Horizon (Low End) = 375,700 meters
Distance to Horizon (High End) = 400,400 meters

Trench Width (Low End) = 3,121.2 meters
Trench Width (High End) = 3,546 meters

Trench Depth/Trench Width = 0.213

Trench Depth (Low End) = 664.816 meters
Trench Depth (High End) = 755.298 meters

Volume = (0.5PIr1r2)*H

r1 = Trench Width/2
r2 = Trench Depth
H = Distance to Horizon

Total Destruction Volume (Low End) = 611,975,326,974.71 m^3
Total Destruction Volume (High End) = 841,823,008,338.312 m^3

200 j/cc

Possessed Yusuke Urameshi's Final Reigan Yield (Low End) = 122,395,065,394,942,000,000 joules or 29.253 gigatons
Possessed Yusuke Urameshi's Final Reigan Yield (High End) = 168,364,601,667,662,400,000 joules or 40.24 gigatons

Underwhelming, but that's ultimately due to the fact I can't find a timeframe for this particular Reigan

Anyway?

What about the Three Kings arc and all that fun shit?